IBM 2809 Network Card User Manual


 
When you have the following cards, install them in the sequence listed below.
v The 2809 or 2824 LAN/WAN workstation card
v The 285x or 2866 Integrated NetFinity cards
v All other adapter cards
Getting Ready
__ 1. Ensure that all jobs are complete.
__ 2. When all jobs are complete, type
pwrdwnsys *immed
on an AS/400 command line and press the Enter key.
Note: Should you encounter difficulties during the installation, contact your
authorized dealer or service provider.
__ 3. When the AS/400 is completely powered down, power off all PCs and
devices, such as printers and displays, that are connected to the system unit.
__ 4. Unplug any power cords, such as printers and displays, from electrical
outlets.
__ 5. Unplug the system unit power cord from the electrical outlet.
__ 6. Remove the system unit back cover by placing your hand near the bottom
of the cover and lifting up and out, (Figure 1).
Figure 1. Remove System Unit Back Cover
2 AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5