Filter
Top Products
v Do not place the CD in direct sunlight.
v Do not use commercial cleaners to clean the CD.
v Do not bend the CD.
Using the drive
This section provides information on how to handle your CD-RW drive, and how
to load CDs into your CD-RW drive.
Caring for the CD-RW drive
To protect your CD-RW drive during operation, observe the following precautions:
v Remove any CD in the drive before moving the drive.
v Do not insert foreign objects into the drive.
v Do not remove the drive cover or attempt to service the drive.
v Do not operate the drive under any of the following conditions:
– High temperature, high humidity, or direct sunlight
– Excessive vibration, sudden shock, or inclined surface
– Excessive dust
Loading a CD
To load a CD into a horizontally mounted CD-RW drive, do the following:
1. Press the Eject/Load button. The tray slides out of the drive.
2. Insert the CD into the loading tray.
3. Close the loading tray by pressing the Eject/Load button, or by gently pushing
the tray in.
Attention: Do not force the tray to open; do not insert objects into the CD tray. If
your tray does not open when you press the Eject/Load button, see “Ejecting a CD
manually” on page 10.
Installation and user’s guide 9