Filter
Top Products
IBM NetBAY console switch 135
1. Refer to the documentation that comes with your rack cabinet for additional
information.
Note: Removing the rack doors and side panels might make your console switch
installation easier.
2. Attach one vertical mounting bracket to each side of the console switch using two
8-32 screws per bracket.
3. Hold the console switch against the side braces, with the rear of the console
switch facing the back of your rack cabinet; then, use four M6 screws and nuts to
attach the console switch to the side braces.
Continue with the rest of the procedure to cable your console switch.
Note: Refer to the Apex User Guide CD for additional information if you are
configuring a tiered installation.
8
1
A
2
3
4
5
6
7
Vertical mounting bracket
Vertical mounting bracket
Console switch