Filter
Top Products
4. Install the device driver at the NetWare server prompt (:) by typing the LOAD
command with the SLOT parameter.
The following LOAD example works for a default (factory setting)
QL2200/2200F adapter.
LOAD QL22.HAM SLOT=X
Replace the X in the load line example with the slot identification number of the
slot in which the adapter is installed.
5. If you are attaching multiple LUN devices, such as tape changers, add the
/LUN switch to the LOAD line. For example, type:
LOAD QL22.HAM SLOT=X /LUN
20 FAStT Host Adapter Installation and User's Guide