Filter
Top Products
3. Remove the CD-ROM drive bracket retaining screw from the front of the
chassis and remove the CD-ROM drive bracket from the drive bay.
4. Install the slimline CD-ROM drive into the drive bay bracket, aligning the
tabs on the bay bracket 1 with the rear of the slimline CD-ROM drive
2and the tiny holes in the drive with the retaining pins in the drive bay
bracket.
5. Press the CD-ROM drive against the retaining spring in the bracket until
the drive is squarely oriented in the bracket and release the drive. You
should hear a slight click as the drive is secured into the bracket.
Chapter 2. Types 6568/6569/6648/6649 61