Filter
Top Products
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
cables” on page 30.
Connecting a diskette drive
1. Locate the cable that came with your computer or with the new drive.
2. Locate the diskette drive connector on the system board. See “Identifying parts
on the system board” on page 23.
3. Connect one end of the signal cable to the drive and the other to the diskette
drive connector on the system board.
Note: Make sure the twisted end of the cable is plugged into the drive.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
cables” on page 30.
Installing a cable lock
To help to protect against theft, an optional cable lock can be installed to secure the
computer to a desk, table, or other fixture. This type of cable lock also
automatically locks the computer cover to the chassis. The cable-lock latch on the
computer accommodates the same type of cable lock used with many laptop
computers. Cable Locks can be ordered directly from IBM. For more information,
see Finding options from IBM in Access IBM.
28 Hardware Maintenance Manual