IBM 8196 Computer Hardware User Manual


 
Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433
These type computers have three expansion slots for PCI adapters and one slot
used for an AGP adapter. You can install an adapter up to 228 mm (9 inches) long.
1. Remove the cover. See “Removing the cover” on page 30.
2. Remove the adapter-slot-cover latch.
3. Remove the adapter being replaced.
4. Remove the new adapter from its static-protective package.
5. Install the adapter into the appropriate slot on the system board.
6. Install the adapter-slot-cover latch.
7. Go to “Replacing the cover and connecting the cables” on page 63.
Types 8196 and 8197
These type computers have three expansion slots for PCI adapters. You can install
an adapter up to 228 mm (9 inches) long.
1. Remove the cover. See “Removing the cover” on page 30.
2. Remove the screw securing the adapter in the slot.
3. Remove the adapter being replaced.
4. Remove the new adapter from its static-protective package.
5. Install the adapter into the appropriate slot on the system board.
6. Secure the adapter with the screw as shown.
42 Hardware Maintenance Manual