Filter
Top Products
4
Step 4. Apply Power to the Switch
The maximum current requirements are 10 amps at 100 VAC or 4.2 amps at 240 VAC.
❑ Attach the AC power cords to the Power Supply blades
and wall outlets or power strips. Secure the strain
relief bales to the plugs. Place the On/Off switches in
the On position.
❑ The switch runs its self tests and begins normal
operation – this may take a few minutes. Observe the
Maintenance Panel and verify that the CPU0 blade
Heartbeat LED is blinking about once per second and
the Chassis Fault LED is NOT illuminated.
Step 5. Verify Workstation Requirements
❑ Verify that your workstation can support the Enterprise Fabric Suite 2007™ application with the following minimum
requirements:
Windows® 2003 SP1/SP2/R2 and XP
256 MB memory minimum; 512 MB recommended
150 MB disk space
1 GHz processor
Video card with 256 colors
CD ROM drive, RJ-45 Ethernet port
Internet Browser: Microsoft
®
Internet Explorer
®
5.0, Netscape Navigator
®
6.0, Firefox
®
1.0, or Mozilla™ 1.5
Java
®
2 Standard Edition Runtime Environment 1.4.2
❑ The default IP address of a new switch is 10.0.0.1. Ensure that your workstation is configured to communicate
with the 10.0.0 subnet.
CHASSIS
GOOD LED
CPU0
HEARTBEAT
LED
CHASSIS
FAULT LED