Filter
Top Products
21
DEUTSCH
ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Screen is blank
and power
indicator is
Flashing green
every 0.5
second
The monitor is
not receiving
a video signal
!
Check that the signal
cable is firmly connected to
the computer.
!
Check that no pins are
bent in the signal cable
connector.
Connecting
your monitor
section
Display mode
of the
computer is
outside the
range of the
monitor
!
Reconfigure the
computer to use a
supported display mode.
Further
information
section
Image appears
to be smeared
There are
noises in the
video signal
!
Select IMAGE LOCK
menu in the OSD. Then
select MANUAL to adjust
FINE/COARSE settings.
User controls
section
Image appears
to be
discolored
The Color
setting may
be incorrect
!
Adjust the Color
settings.
User controls
section
A few dots are
missing,
discolored, or
inappropriately
lighted.
!
The LCD contains over 2,300,000 thin-
film transistors (TFTs). A small number of
missing, discolored, or lighted dots may be
present on the screen, which is an intrinsic
characteristic of the TFT LCD technology
and is not an LCD defect.
Problem
Possible
Cause
Suggested Action Reference
For image problems, you
may want to run AUTO
Setup again before consulting
to this section. In most cases,
AUTO SETUP can fix the
problems. See Auto Setup
section for details.
T50_setup.fm Page 21 Thursday, August 9, 2001 11:09 AM