IBM 9TX Personal Computer User Manual


 
NetBAY 42 Enterprise Rack (Type 9308 Models 42P, 42X, 4SA, 4SB, 42S, 42E) 89
Rear door Models 42S, 42E
Use the following procedure to remove a rear door from the rack cabinet:
Figure 39. Removing a rear door from the rack cabinet
1. Unlock and open the rear door.
2. Grasp the door firmly with both hands and lift it upward and away from the
hinges; then, set the door aside.
Reverse this procedure to install the rear door on the rack cabinet.
Attention: The bottom hinge pin on the rear door is longer than the top hinge pin.
Ensure that you engage the bottom hinge pin first when you install a rear door on
your rack cabinet.
Bottom
hinge pin
Rear door