Filter
Top Products
FeaturesEP-8KTA
Page 2-1
Section 2
FEATURES
EP-8KTA Features:
EP-8KTA is based on the AMD Socket A Processors operating at 600
~ 1GHz on Socket A.
Designed with VIA KT133 AGPset.
Supports up to 768MB of DRAM (minimum of 32 MB) on board (please
see Section 3-2).
EP-8KTA will support Error Checking and Correcting (ECC) when using
parity SDRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
Supports (1) 16 bit ISA slots, (6) 32 bit PCI slots, (1) 4X AGP slot and
provides (2) independent high performance PCI IDE interfaces capable of
supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.
The EP-8KTA supports (6) PCI Bus Master slots and a jumperless PCI
INT# control scheme which reduces configuration confusion when plug
ging in PCI card(s).
Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,
ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese Floppy 3 mode is also supported
Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released.
EP-8KTA utilizes a Lithium battery which provides environmental
protection and longer battery life.