Filter
Top Products
InstallationEP-8KTA
Page 3-7
Section 3-3
System Memory Configuration
Memory Layout
The EP-8KTA supports (3) PC133 168-pin DIMMs (Dual In-line Memory
Module). The DIMMs is for SDRAM (Synchronous DRAM) only.
DIMM SDRAM may be 83MHz (12ns), 100MHz (10ns) or
125MHz (8ns) bus speed.
If you use both 50ns and 60ns memory you must configure
your BIOS to read 60ns.
When using Synchronous DRAM we recommend using the
4 clock variety over the 2 clock.
Figure 2 and Table 1 show several possible memory configurations.
* SDRAM only supports 32, 64, 128, 256MB DIMM modules.
* We recommend to use PC100 Memory Module for bus speed 100MHz and
PC133 Memory for bus speed over 100MHz.
* Using non-compliant memory with higher bus speed (over clocking) may
severely compromise the integrity of the system.
DIMM 1
DIMM 2
Bank 0/1
Synchronous
DRAM
Bank 2/3
DIMM 3
Bank 4/5
yromeMlatoT
1MMID
)1/0knaB(
2MMID
)3/2knaB(
3MMID
)5/4knaB(
BM652=
mumixaM
*MARDS
,BM821,BM46,BM23
1XBM652
enoNenoN
BM215=
mumixaM
*MARDS
,BM821,BM46,BM23
1XBM652
*MARDS
,BM46,BM23
1XBM652,BM821
enoN
BM867=
mumixaM
*MARDS
,BM821,BM46,BM23
1XBM652
*MARDS
,BM821,BM46,BM23
1XBM652
*MARDS
,BM821,BM46,BM23
1XBM652
Figure 2
Table 1