Filter
Top Products
The value *SAME means using the current values at the target site system without changing those
values. The value *NONE indicates there is no special environment. The value *S36 sets up the
System/36 environment. Specifying a value other than *SAME causes the QSPCENV system to be
changed at the target site system.
Change Licensed Program Options Display
After you press the Enter key from the Change Major System Options display, the Change Licensed
Program Options display is shown (example only):
+————————————————————————————————————————+
| Change Licensed Program Options |
| |
| Installation Profile.......: INSTALLX |
| |
| Type choices, press Enter. |
| |
| Install option... 4 1=Installed products |
| 2=All products |
| 3=New products |
| 4=Target system default |
| |
| |
| Installation device . *ALTIPL *ALTIPL, Name |
| |
| Replace if current . Y Y=Yes, N=NO |
| |
| Automatic IPL.... Y Y=Yes, N=NO |
| |
| |
| |
| |
| F3=Exit F12=Cancel |
| |
+————————————————————————————————————————+
The Change Licensed Program Options display contains the following information:
v Installation profile
This field is an output-only field. The system automatically displays the installation profile name
(INSTALLX in the example) you created or chose on the Work with Installation Profiles display.
v Install option
– Installed products: Specifies to install all licensed programs and optional items of the licensed
programs that are currently installed on the target system.
When you use this option to install licensed programs, the system estimates the amount of auxiliary
storage needed to perform the installation. If you do not have enough auxiliary storage to load the
new release, the system issues an error message.
Note: For an install to complete successfully when this option is
selected, the distribution media must contain all products
currently shown on option 10 of the GO LICPGM menu.
The media must also be installed on the target site
system.
– All products: Specifies to install all licensed programs and optional items of the licensed programs
that are found on the distribution media.
– New products: Specifies to install only those licensed programs and optional items of the licensed
programs that do not already exist on the system. Choose this option if you are adding new licensed
programs to the target system.
When you use this option, the system does not calculate the amount of auxiliary storage needed to
perform the installation.
Using central site distribution to install multiple iSeries servers 41