Filter
Top Products
Probe for Nortel CNM 19
Error to parse event
completely
Failed to parse event
completely
Name is null, cannot
create Element
NetcoolIRPManager:
Category Value NOT
supported: Discarding
Alarm
NetcoolIRPManager:
Error when parsing
event
NetcoolIRPManager:
Failed to send event
The probe cannot parse the
alarm; this is probably because
the alarm is not in a format that
the probe can understand.
Check that the Nortel CNM
server is running correctly.
Failed to get timeout
property value,
defaulting to 0
The Timeout property has not
been set.
Check the value for the Timeout
property; change this value if
necessary.
Failed to find the
AlarmIRP object
The probe could not get the
AlarmIRP object using the
EntryPoint IRP.
Check the value for the
AlarmIrpName property;
change this value if necessary.
Failed to find the
NotificationIRP
object
The probe could not get the
NotificationIRP object
using the EntryPoint IRP.
Check the value for the
NotificationIrpName
property; change this value if
necessary.
Failed to perform
resynch
The probe could not
resynchronize the alarms with
device.
Check the value for the Resynch
property; change this value if
necessary.
Failed to narrow
Security IRP
interface
SECURITY: Failed to
get IRP object :
SECURITY: Unknown
exception occured
The probe has failed to get the
EntryPointIRP object.
Check the value for the
SecurityIrpFtpCommand
property; change this value if
necessary.
NetcoolIRPManager:
Stack Trace to stder:
This message is generated by
the Netcool IRP Manager.
This message is intended for use
when debugging.
NetcoolIRPManager:
Failed to retrieve
EntryPointIRP object
from security
interface:
The probe has failed to get the
EntryPointIRP object.
Check the value for the
SecurityIrpFtpCommand
property; change this value if
necessary.
Table 7. Error messages (3 of 4)
Error Description Action