Filter
Top Products
7
US
x Displaying the current input signal
When you press the button to display the menu, information
on the current input signal is displayed. If the current input signal
matches one of the monitor’s factory preset modes, the resolution
and vertical frequencies are displayed. (See page 18 for a list of
factory preset modes.) If the current input signal does not match
one of the factory presets, the horizontal and vertical frequencies
are displayed.
Adjusting the brightness and
contrast (BRIGHT/CONTRAST)
These settings are stored in memory for all signals.
1 Press the M button to call up the BRIGHTNESS
adjustment window, or press the 6 m button to call
up the CONTRAST adjustment window.
2 Press the </, buttons to adjust the brightness
( ) or contrast (6).
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE ( ) of the
COLOR ( ) menu, the following BRIGHT/CONTRAST menu
appears on the screen.
You cannot adjust the contrast (6) nor brightness ( ) on this
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the COLOR ( ) menu.
For more information about using the sRGB mode, see
“Adjusting the color of the picture (COLOR)” on page 10.
OPTION (page 12)
Adjusts the monitor’s
options.
The options include:
• locking the controls
• changing the on-screen
menu’s language
• changing the on-screen
menu position
0 RESET (page 12)
Resets the adjustments.
OPT ONI
CONTROL
LOCK
OFF
ON
1280x1024 / 85Hz
RESET
CURRENT
MODE
CANCEL
OK
1
2
1280x1024 / 85Hz
1280x1024 / 85Hz
EXIT
45
the vertical
frequencies of
the current
input signal
the resolution/horizontal
frequencies of the current input
signal
CONTRAST/IBR GHT
1280x1024 / 85Hz
s
:/
RGB