IBM S31 Laptop User Manual


 
ThinkPad s30, s31 Hardware
Maintenance Manual
About This Manual
This manual contains service and reference information for
the IBM ThinkPad s30 and s31products. Use this manual
along with the diagnostics tests to troubleshoot problems
effectively.
The manual is divided into sections as follows:
v The introduction section provides general information,
guidelines, and safety information required to service
computers.
v The product-specific section includes service, reference,
and product-specific parts information.
This manual is intended for trained servicers who are
familiar with ThinkPad products. Use this manual along
with the PC-Doctor to troubleshoot problems effectively.
Read This First
Before you go to the checkout guide, be sure to read this
section.
Important Notes:
v Only certified trained personnel should service the
computer.
v Read the entire FRU service procedures before
replacing any FRUs.
v Use new nylon-coated screws when you replace
FRUs.
v Be extremely careful during write operations such
as copying, saving, or formatting. Drives in the
computer that you are servicing might have been
rearranged or the drive startup sequence might have
been altered. If you select an incorrect drive, data or
programs might be overwritten.
v Replace FRUs only for the correct model. When you
replace a FRU, make sure the model of the computer
and FRU part number are correct by referring to the
FRU parts list.
v A FRU should not be replaced because of a single,
unreproducible failure. Single failures can occur for a
variety of reasons that have nothing to do with a
hardware defect, such as: cosmic radiation, electrostatic
discharge, or software errors. FRU replacement should
be considered only when a recurring problem exists. If
1