Filter
Top Products
32 S/390 PID: ThinkPad Enabled for S/390
- 11.42.47 d m=cpu
11.42.47 IEE174I 11.42.47 DISPLAY M 662
PROCESSOR STATUS
ID CPU SERIAL
0 + 00F0001247
+ ONLINE - OFFLINE . DOES NOT EXIST W WLM-MANAGED
- 11.43.44 d a,l
11.43.44 IEE114I 11.43.44 2000.314 ACTIVITY 665
JOBS M/S TS USERS SYSAS INITS ACTIVE/MAX VTAM OAS
00002 00011 00001 00027 00012 00001/00010 00007
JES2 JES2 IEFPROC NSW S VTAM VTAM VTAM NSW S
DLF DLF DLF NSW S RACF RACF RACF NSW S
VLF VLF VLF NSW S INETD4 STEP1 BPXOINIT OWT AO
LLA LLA LLA NSW S TSO TSO STEP1 OWT S
SDSF SDSF SDSF NSW S TCPIP TCPIP TCPIP NSW SO
PORTMAP PORTMAP PMAP OWT SO FTPD1 STEP1 FTPD OWT AO
NFSS NFSS GFSAMAIN NSW SO
P390 OWT
- 11.41.55 d u,,,a80,8
11.41.55 IEE457I 11.41.55 UNIT STATUS 659
UNIT TYPE STATUS VOLSER VOLSTATE
0A80 3390 S OS39RA PRIV/RSDNT
0A81 3390 A OS3RAA PRIV/RSDNT
0A82 3390 A OS39M1 PRIV/RSDNT
0A83 3390 F-NRD /RSDNT
0A84 3390 F-NRD /RSDNT
0A85 3390 F-NRD /RSDNT
0A86 3390 F-NRD /RSDNT
0A87 3390 A OS39HA PRIV/RSDNT
The processor type (in the d m=cpu response) is 1245. This is the processor type for a
Netfinity/EFS system. Otherwise, the displayed responses are exactly the same (except,
perhaps, for storage sizes) as would be found when running on any S/390 hardware.
4.2 Operation and use
Once you have OS/390 IPLed, operation is the same as for any other OS/390 installation.
4.2.1 User terminal connection
A TSO user, for example, would normally connect to the system by connecting a TN3270
session to the Linux IP address (or name, if you have a Domain Name Server service), port
24. This should produce the Terminal Solicitor display, as shown in Figure 4-1 on page 31.
The user would then select one of the available sessions (in the Terminal Solicitor display)
and would be connected to this S/390 address. When he eventually drops the TN3270
session, the S/390 3270 address will be restored to the Terminal Solicitor display for others to
use.
If you start OS/390 TCP/IP, a user could connect directly to it by using TN3270 and the IP
address you assigned to OS/390 TCP/IP. In this case, the user would not be connected to
the Terminal Solicitor, but would be connected directly to OS/390 TCP/IP.