IBM Series 1400 Laptop User Manual


 
Bottom View
Tilt feet
Memory door
Battery-pack
latch
Electrical Safety Notice
DANGER
Electrical current from power, telephone, and com-
munication cables is hazardous. To avoid shock
hazard, connect and disconnect cables as shown
below when installing, moving, or opening the
covers of this product or attached devices. The
3–pin power cord must be used with a properly
grounded power outlet.
Turn everything OFF.
First, attach all cables
to devices.
Attach the signal
cables to the
receptacles.
Attach the power
cord to an outlet.
Turn the device ON.
To Connect
Turn everything OFF.
First, remove the
power cord from
the outlet.
Remove the signal
cables from the
receptacles.
Remove all cables
from device.
To Disconnect
Note: In the U.K., by law:
The telephone line cable must be connected after the
power cord.
The power cord must be disconnected after the tele-
phone line cable.
2