Filter
Top Products
ESS Copy Services CLI Command Description
9
ESS Copy Services CLI command description
rsExecuteTask
Executes one or more predefined Copy Services Server tasks and waits for the tasks to
complete execution. The command returns 0 for successful completion and greater-than
zero if there is an error. .
Note: For FlashCopy tasks, execution is completed when the FlashCopy pairs have
been established and the control bitmaps have been generated. This usually only lasts a
few seconds.
rsList2105s
Displays the mapping of host physical volume name to ESS volume serial number for all
disks assigned to the host system from which the command is executed.
rsPrimeServer
Notifies the Copy Services Server of the mapping of host disk name to ESS volume
serial number. This permits a host volume view from the ESS Copy Services Server
Web interface.
rsQuery
Queries the FlashCopy and PPRC status of one or more volumes.
rsTestConnection
Determines whether the Copy Services Server can be contacted successfully.
rsQueryComplete
Determines PPRC status.
With the exception of rsList2105s, all commands require the IP address or complete
hostname of the Primary Copy Services Server as parameter. Optionally, you can
specify the address of the Backup Copy Services Server.