iHome iH11 Clock User Manual


 
1. Dock the already playing iPod. The iH11 will automatically turn on and you will hear the music playing from your iPod.
The iPod Icon will appear at the right lower corner the display, indicating iPod playing mode.
For enhanced bass, slide the EXB Expanded Bass Switch located on the back of the unit to the ON position.
Note: If the playing song/music loudness is too low on the iPod itself, the iH11 may not detect that the iPod is in play mode.
Press the iPod Play/Pause Button on the iH11 or remote control twice to play it.
2.
When the iPod is docked and in standby mode, press the
iPod Play/Pause Button on the iH11 or remote control to play
it. The iPod Icon will appear at the right lower corner the display, indicating iPod playing mode.
3. Press the iPod Play/Pause Button again to pause play; press again to resume it.
4. Press the Volume + and Volume – Button on the iH11 or remote control to adjust the system volume. Press the
Mute Button on the remote control to mute the output; press Mute again to release it.
5. Press the >> or << (forward or reverse) Button on the remote control to go to the next or previous track. Press
and hold while a track is playing for high speed forward or reverse music search of the current track.
6. To turn the iH11 OFF, press the Alarm Reset/Power Off Button on the iH11 or remote control. Your iPod will
continue charging while in the dock.
6
Listening to your iPod
If you are using an iPod without a docking port or other MP3 player or portable audio device, you can still play it through
the iH11 via the Line-in Jack.
1. Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or line-out jack on
your device and the other end of the patch cord into the iH11 Line-in Jack, located on the back of the unit.
2. Press the iPod Play/Pause Button on the iH11 or remote control to turn the iH11 on. The iPod Icon will appear at
the lower right corner the display, indicating Line-in playing mode.
3. Turn on and play your device.
4. Press the Volume + and Volume – Button on the iH11 or remote control to adjust the system volume. You may
need to adjust your device volume, too.
5. To turn othe iH11 OFF, press the Alarm Reset/Power Off Button on the iH11 or remote control. Please remember
to turn off your device, too.
Listening to a non-docking iPod or other portable audio devices