iHome IP38 Clock User Manual


 
Installing/Replacing Speaker Batteries
FOR PORTABLE LISTENING
When music becomes weak or distorted, change batteries
1. Open the battery compartment cover located inside the unit.
2. Insert 5 “AA” (LR6) batteries, checking the
+ and ends of the
batteries match the drawings inside the battery compartments.
We recommend the use of alkaline batteries for longer life. Different
types of batteries or new and used batteries are not to be mixed.
3. Close the battery compartment cover.
NOTE: Unit will not charge iPod/iPhone while operating on battery power
Battery Information
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Make sure you dispose of batteries properly (see your local regulations).
Installing/Replacing Backup Battery
The iP38 uses a backup battery system to provide continuous alarm operation and
clock settings in the event of a power failure. The backup battery is included. If the
Backup Battery Low Icon (located on the upper left of the display) is flashing, it is
time to replace the backup battery. Please make sure the AC adaptor is connected,
otherwise all settings may be lost during battery replacement.
Open the backup battery compartment cover located inside the main battery
compartment. Insert 1 “CR2032” battery with the”+” side facing up as indicated.
Replace battery compartment cover and main battery compartment cover.
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed
to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container
containing metal objects, mix with used or other battery types, or store with hazardous or combustible
materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and
disposal.
Connecting the AC Adaptor
For home operation and to charge your iPhone/iPod, connect the AC adaptor cable
plug into the DC jack located under the black tab on the left side of the unit, then plug
the AC adaptor into a working wall outlet. When connected to the AC adaptor, the
iP38 charges and lets you play your iPod/iPhone.
NOTE: This AC adaptor is for use with the iP38 only. To avoid damage, do not use
other adaptors with the iP38.
Getting Started with your iP38
3
Battery Compartment
RESET
RESET
TEST
TEST