Filter
Top Products
ENGLISH
14 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
n The screen adjustments described in this manual are designed to set image position and minimize flicker
or blur for the particular computer in use. They are unlike the adjustments you would make on a CRT
monitor.
n The monitor is designed to provide the best performance at resolution of 2048 × 1536, but can not provide
the best at resolutions of less than 2048 × 1536 because the picture is automatically stretched to fit the
full screen or displayed at optimum resolution. It is recommended to operate at resolution of 2048 × 1536
in normal use.
n Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the
screen enlargement process.
n It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
n Perform adjustments after a warm-up period of at least thirty minutes.
n Additional adjustments may be required after the Automatic set-up depending on the resolution or signal
timing.
n The Automatic set-up may not work correctly when displaying the picture other than the Test.bmp
(screen adjustment pattern). In this case, manual adjustments are required.
Zebra pattern
This is the image
displayed at 2048 × 1536.
Color bar
Picture frame
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
There are two ways to adjust the screen. One way is automatic adjustment for FINE, COARSE and
POSITION. Another way is performing each adjustment manually.
Perform the Automatic set-up first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing
the Automatic set-up, manual adjustments are required. Both adjustments should be made by using the
screen adjustment pattern (Test.bmp) obtained via the iiyama web site (http://www.iiyama.com or http:/
/www.iiyama.co.uk).
This manual explains adjustment under Windows 95/98/2000/Me/XP.
A
Set the IMAGE SIZE feature to NORMAL and display the picture at the optimum resolution.
B
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE n Consult the appropriate documentation for doing this.
n Test.bmp is made at resolution of 2048 × 1536. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft
®
PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fit the screen”.
[Adjustment pattern]