Filter
Top Products
ENGLISH
14 OPERATING THE MONITOR
+
–
+
–
+
–
B
Press the Auto Button. (Direct adjustment)
Or perform the Auto Set-up.
C
Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Set-up.
D
Adjust the V-Position so that the top and bottom of the picture frame will fit to the
display area.
E
1) Adjust the H-Position so that the left side of the picture frame will move to the left
edge of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
NOTE n When the left side of the picture frame moves apart from the left edge of the display
area during the Clock adjustment, adjust steps 1) and 2).
n Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
n The picture may flicker during the Clock, H-Position and V-Position adjustment.
NOTE n In case that you have to make adjustments at resolutions of less than 1024 × 768,
adjust the vertical position of the screen adjustment pattern to center.