Filter
Top Products
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
CAUTION
<Installation>
A
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B
Hold the monitor and push the Stand.
C
Hold the monitor and push the Stand-Base.
<Remove>
A
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B
Press the stopper at the bottom of the stand and remove the Stand-Base from the stand.
C
Press the stopper at the back of the stand and remove the Stand from the monitor.
Stand-Base
Stand
FITTING AND REMOVAL OF BASE : ProLite E1706S
Stopper
Stopper
Stand-Base
Stand