ENGLISH
OPERATING THE MONITOR 9
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory
with the COMPLIANT
TIMING shown on page 21. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS.
((
((
(
Press the Menu Button to start the On Screen Display feature. There are
additional Menu items which can be switched by using the / Buttons.
Auto Adjust
Contrast/Brightness
Color Adjust
Information
Image Adjust
Setup Menu
Memory Recall
Audio Menu
Main Menu Analog
?
AUTO
SET
1 : Exit 2 : Select
BB
BB
B
Select the Menu item which contains the adjustment icon relating to the
adjustment you want to make. Press the Select Button. Then, use the /
Buttons to highlight the desired adjustment icon.
CC
CC
C
Press the Select Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Adjustments for H. / V. Position, H.Size and Fine Tune are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Time Out has passed. Also, press the Menu button to quickly turn off the On-
Screen Display.
NOTE
For example, to correct for vertical position, select Menu item of Image Adjust and then press the
Select Button. Then, select (H. / V.Position) by using the / Buttons.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
An adjustment page appears after you press the Select Button. Press the Select Button again.
Then, use the / Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Auto Adjust
Contrast/Brightness
Color Adjust
Information
Image Adjust
Setup Menu
Memory Recall
Audio Menu
Main Menu Analog
i
?
AUTO
SET
1 : Exit 2 : Select
V. Position
Use Up/Down to Adjust
1 : Exit 2 : H. Position
H. /V. Position
H.Size
Fine Tune
Sharpness
Image Adjust
1 : Exit 2 : Select