Filter
Top Products
Adjustment Item
OSD
-+
Problem / Option Button to Press
OSD Position
1 2 3 4 5
You can move the OSD display area to any one of the following
5 positions within the overall display:
Svenska
Language
English
Deutsch
English
German
Français
Nederlands
French
Dutch
Full Screen
OFF
Mode1
The picture is displayed at the optimum
resolution.
Stretch the picture and keep the screen size
ratio.
NOTE
Adjust the screen size at resolutions of less than 1280 × 768. When selecting “1”
or “2” displayed text or lines may be blurred, or brightness may not be uniform
when inputting stripe pattern signal or the like.
Swedish
Mode2
Stretch the picture to fit the full screen.
Press the + Button on the monitor or the Button on the Remote
Control to move the OSD in numerical order. Press the – Button
on the monitor or the Button on the Remote Control to move
the OSD in reverse numerical order.
Signal Select
Direct
Menu : 3
(Analog)
Input 1
Input 2
Select the INPUT 1.
Select the INPUT 2.
Video 1*
1
Select the VIDEO input.
Video 2*
1
Select the S VIDEO input.
or
Spanish
Italiano Italian
Russian
Español
Japanese
OPERATING THE MONITOR 9
Return To Menu
Highlight “Menu : 3” again.
Reset
NO
YES
Return to Menu.
Factory-preset data is restored.
Zoom
Zoom in
Zoom out
To move the zoom point to the right.
To move the zoom point to the left.
To move the zoom point upward.
To move the zoom point downward.
or
or
or
Direct
Only the Remote Control has
direct adjustment.
You can skip the Menu pages and display an
adjustment scale directly by using the
following button operations.
l Signal Select
Press the Input Button on the monitor or the
Remote Control when the menu is not
displayed.
l Zoom
Press the Zoom Button on the Remote Control
when the menu is not displayed.
Direct
*
1
Optional input only, see APPENDIX B.