Filter
Top Products
6
Main Configuration Screen
After running through an initial self test, the screen will display: Press
Enter
for Device
Configuration. Press
Enter
to be taken to the main configuration screen.
The Main Configuration screen contains the following:
Saved Values
— displays changes made during current session.
•
IP Address (Should be assigned during initial configuration)
•
Subnet Mask (Should be assigned during initial configuration)
•
Default Gateway
Current Values
— displays values currently in use.
•
IP Address (IP address of SNMP agent)
•
Subnet Mask (mask to define IP subnet agent is connected to)
•
Default Gateway (default router for IP traffic outside subnet)
Command List
•
I
= Enter New Saved Parameter Values
•
P
= Change Password
•
T
= New Trap Destination
•
K
= Remove ALL Trap Destinations
•
C
= New Community String
•
U
= Delete ALL Community Strings
•
D
= Enable/Disable DHCP
•
E
= End Session
•
Space Bar
= Opens device specific configuration options