Filter
Top Products
3
The table below shows the DIP Switch settings for McPC 10/100:
Feature Switch # Function Default
LFD 5 Link Fault Detection (Available in Force modes only) OFF
AN 6
Auto Negotiation Mode (Valid only when Force mode
is disabled)
ON
Force 7
Force Mode – Forces the converter to operate at 10 or
100 Mbps as determined by switch
8
OFF
10/100 8
Valid only when switch
7
is
ON.
When
ON
, the converter operates at 10 Mbps. When
OFF
, the converter operates at 100 Mpbs.
8
is only
valid in Force Mode, i.e. when switch
7
is
ON
OFF
NOTE
Switch #'s
1 – 4
are factory configured
– DO NOT CHANGE