Filter
Top Products
15
1. Insert your smartcard with the contacts facing upwards like
illustrated.
The software will show that a card has been inserted and will
try to detect the card. When the card has been detected it is
automatically selected on the list. Make sure the correct card
has been selected before proceeding.
2. Load one or more data fi les
Different smartcards have different memory areas, most have a
fl ash-area, an internal EEprom and an external EEprom. Usually
one fi le for each area needs to be loaded depending on the
application usage.
3. Click the big ‘Write’ button
This begins programming of all the loaded fi les. If you wish to
program only one particular memory area, push the arrow part
of the ‘Write’-button and select the area.
Quickstart guide
UK . ENGLISH