Filter
Top Products
Turn off the projector
Download it at www.infocus.com/support
The Reference Guide is available in multiple languages. It covers advanced setup and
operation, including lamp replacement instructions.
Press the power button
The power light on the projector will blink while the fan cools
the lamp. If you need to unplug the projector, wait until the
fan stops.
Note: While the power light is blinking, button presses on the
projector and remote are ignored.
6
READ THE REFERENCE GUIDE
SOURCE
PRESET
TEMP/LAMP
POWER
1
Press
MENU
, then press or to review the menu
options.
2
To enter a submenu, highlight the desired submenu and
press on the projector or
Select
on remote.
3
To adjust a menu setting, highlight the desired menu
option and press or .
4
Press the
MENU
button to exit the menu system.
Note:
Most picture settings are disabled (gray) unless a source is being
displayed.
Using the menus