Filter
Top Products
27
Advanced settings
The following 4 options are for computer or HDTV sources only.
Phase: adjusts the phase of the video signal’s digital conversion.
Tr a ck i ng : adjusts the frequency of the video signal’s digital conversion.
Horizontal/Vertical Position: adjusts the position of the source.
Sync Threshold Adjust: If a hardware device, such as a DVD player, is not
syncing properly with the projector, select this option to help it to sync
when connected to the projector.
Tr ue L if e : This option refers to Faroudja’s TrueLife processing of the image.
All standard definition interlaced video signals (composite, S-video and
component) are routed through this processor. Extended and High Defini-
tion progressive component sources are not routed though this processor by
default. You can turn TrueLife on to route these signals through the proces-
sor and then adjust the following 3 options:
Chroma Detail: This adjusts the color sharpness.
Luma Detail: This adjusts the overall sharpness (edge enhancement) of
the Luma signal.
Chroma Delay: aligns the Luma and Chroma signals.
CCS: (Cross Color Suppression) processes the signal to remove any color
information from the luma portion of the signal. It is On for all composite
signals, Off for all component signals, and can be turned on or off for all S-
video signals.
Film Mode: controls deinterlacing. If 2:2/3:2 Enable is selected, the deinter-
lacer attempts to perform a 3:2 pulldown, assuming the source was origi-
nally created on 24fps film. If the original source is 30fps film, you should
select NTSC 2:2 pulldown.
Noise Reduction: adjusts signal noise reduction. Choose Off to have no
noise reduction, choose Auto to have the software determine the amount of
noise reduction, or choose Manual and adjust the Level. Skintone Bypass
prevents the noise reduction from being performed on skin tones, thus pre-
venting them from appearing overly softened.
Advanced
TrueLife
Film Mode
Noise Reduction