Filter
Top Products
41
Red LED Behavior and Projector Errors
If the projector is not functioning properly and the LED is blinking red, con-
sult Tab le 3 to determine a possible cause. There are two-second pauses
between the blinking cycles. Visit www.infocus.com/service for more
details on the red LED error codes.
Table 3:
Red LED Behavior Explanation
One (1) blink The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
Two (2) blinks The lamp counter hours have exceeded
lamp life hours. Replace the lamp and
reset the lamp hours counter.
Three (3) blinks The projector has shut down the lamp.
Check the lamp door. Replace the lamp.
Contact Technical Support (see page 24)
for repair if replacing the lamp does not
solve the problem.
Four (4) blinks The fan has failed. Contact Technical Sup-
port (see page 24) for repair or replacing
the fan.
Five (5) blinks The projector is overheating. Check for a
blocked air vent. Contact Technical Sup-
port (see page 24) for repair if clearing
the air vents does not solve the problem.