InFocus X1 Projector User Manual


 
7
Displaying a computer source image
Remove the lens cap.
Toggle the Power switch on the side of the projector to the On position.
The LED flashes green and the fans start to run. When the lamp comes on,
the start up screen displays and the LED is steady green. It can take a
minute for the image to achieve full brightness.
? No start up screen? Get help on page 17.
Turn on your computer.
The computers image should appear on the projection screen. If it doesnt,
press the Computer button on the projectors keypad.
If your computer has Windows 98 as its operating system, see Using the
projector with Windows 98 for the first time on page 9 regarding the driver
setup process.
Make sure your laptops external video port is active.
Many laptops do not automatically turn on their external video port when a
projector is connected. Usually a key combination like FN + F5 is used to
turn the external display on and off. Refer to your laptops documentation
to learn your laptops key combination.
? No laptop image? Try pressing the Auto Image button on the key-
pad. Get help on page 18.
remove lens cap
toggle Power switch
turn on computer
activate laptop’s external port