Filter
Top Products
38
Settings menu
Audio: allows adjustments to Volume of the internal speaker and allows a
chime to play when starting the projector. Adjustments can also be made
from the projector’s keypad and the remote.
Sources: Power-up Source determines which source the projector checks
first for active video during power-up. When the Autosource feature is On,
the projector automatically finds the active source, checking the selected
Power-up Source first. The source options are Computer 1 for a computer,
progressive DVD, or HDTV source, and Video 1 (for S-video connections),
and Video 2 (for composite video connections) for video sources. When this
feature is Off, the projector defaults to the source selected in Power-up
Source. To display another source, you must manually select one by press-
ing the Computer or Video button on the remote or keypad.
System>Rear: reverses the image so you can project from behind a translu-
cent screen. Ceiling: turns the image upside down for ceiling-mounted pro-
jection. Low Power: toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter. Display Messages: displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen. Screen Saver Off: prevents
your computer from going into Screen Save mode. Screen Trigger turns on
the 12 volt DC output switch on the connector panel. Power Save: automat-
ically turns the lamp off after no signals are detected for 20 minutes. After
10 additional minutes with no signal, the projector powers down. If an
active signal is received before the projector powers down, the image will
be displayed. After an additional 10 minutes with no signal, the projector
powers down and can be toggled off. If an active signal is received before
the projector powers down, the image will be displayed. When Power Save
is enabled, Screen Save is disabled. Screen Save automatically blanks the
screen with a black color after no signals are detected for a preset number of
minutes. The image returns when an active source is detected or a remote or
keypad button is pressed.
Settings menu
Audio
Power-up
Source
Sources
System menu
Screen Save
X2_usrguide_One_Year.fm Page 38 Wednesday, April 21, 2004 9:34 AM