Filter
Top Products
32
Using the Projector
Color
The color setting adjusts a video image from black and white to
fully saturated color.
•
Press the left mouse button to decrease the amount of color in
the image.
•
Press the right mouse button to increase the amount of color in
the image.
Blank Screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby. Click the but-
ton to toggle between the two options.
Reset All
Click either mouse button to reset all the options (except Lan-
guage, Video Standard, Ceiling, and Rear Projection) in all the
menus to their original settings. This also returns Freeze and
Mute to their default (off) settings.
Menu Position
This lets you move the menu to various locations on the screen,
allowing you to view different parts of the image while making
adjustments. The default position is the center of the screen. Click
Menu Position to move the menu to the upper-left corner; click it
again to move it to upper-right, then lower right, then lower left,
then center again.