Filter
Top Products
Adjustable Height Ceiling Installation
Complete the following steps to install the projector mount and projector on your ceiling with the optional
suspension adapter.
This installation works best with high ceilings (F
IGURE 3).
Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector
mount with the arrow pointing toward your screen.
6. Use the Allen wrench (F) to remove the upper plate from the mount assembly (D).
7. Use the Allen wrench to remove the two screws from the enclosed end of the of the suspension
adapter, and place it into the slotted extension on the upper plate (E). Make sure that the two (2) outer
holes on the suspension adapter align with the holes on the slotted extension on the upper plate.
8. Replace the two screws removed in step 2 into the two (2) holes to secure the suspension adapter to
the upper plate.
9. Attach the mount assembly to the suspension adapter and secure them with the two screws removed
in step 1.
10. Secure the upper assembly to the ceiling using the commercially available hardware (E) suitable for
your environment. Be sure that the upper assembly arrow is pointing toward your screen.
11. Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of
the upper assembly (D) by its tabs.
12. Rotate the projector (C) with the mounting bracket (B) attached 180º
so that the projector’s focus ring
is pointing toward your screen.
13. Align the safety knob on the mount assembly with the end of the arrow-shaped slot on the mounting
bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the safety knob.
14. Hand-tighten the remaining two tension knobs to secure the mounting bracket to the amount
assembly.
CAUTION: Check all of the hardware for proper tightness and security. Do not over-tighten the screws.
S
EE FIGURE
3
NOTE: Use the Allen wrench key (F) for the following modification
4
C
Ceiling structure
Wood stud
Center of wood stud
D
E
C
B
A
Solid ceiling structure
E
D
C
C
B
A
Extension adapter
Extension adapter
Insert and rotate 180°
and lock down
Insert and rotate 180°
and lock down
Adjustable screws
Adjustable screws
WARNING
When using the optional
extension adapters and making
a height adjustment while
secured to the wall or ceiling do
not remove the screws
completely from the extension.
Failure to do so could result in
injury and damage to the
projector.