InFocus X7 Projector User Manual


 
28
English ...
Appendices
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Operation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
Problem: Partial, scrolling or incorrectly displayed image
Press “Re-Sync” on the remote control.
If you are using a PC:
ForWindows3.x:
1. IntheWindowsProgramManager,doubleclickthe“Windows
Setup” icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to1280x1024.
ForWindows95,98,2000,XP:
1. Fromthe“MyComputer”icon,openthe“ControlPanel”folder,
and double click the “Display” icon.
2. Select the “Settings” tab
3. Click on the “Advanced Properties” .
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
Troubleshooting
If you experience trouble with the projector, refer to the fol-
lowing information. If the problem persists, please contact
your local dealer or service center.