InFocus X9 Projector User Manual


 
12
English ...
Operation
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected.ThePowerLEDwillturnashblue.
3. Turn on the lamp by pressing “Power/Standby” on the
control panel. The startup screen will display for about 25
seconds and the Power LED will turn blue.
4. Turnonyoursource(computer,notebook,videoplayer,etc.)
The projector will detect your source automatically.
Ifyouconnectmultiplesourcesatthesametime,usethe
“source”ontheremotecontrolorusethe“computer“,
”video1”,“video2“ontheremotecontroltoswitch.
Powering On/Off the Projector
Turn on the projector
rstandthenthesignal
sources.
Power/Standby
Lens Cap
2
1