Filter
Top Products
Install the Hub
Connect
the Devices
Check the
Connections
Quick Start
• Remove the hub and parts from the box.
• Use the enclosed brackets if you plan to
mount the hub in a rack.
• Install the Express 220T Stackable Hub in
a rack or on a shelf.
• Plug in the power cord.
• Check the port LEDs to confirm the link
status.
• A solid LED (on the left) indicates a valid
link.
• All ports are set to automatically detect the
speed of the device connected to it.
• Connect PCs and print servers to the hub
with a straight-through cable.
• Use a crossover cable to connect a hub to a
switch.
• Use only CAT 5 UTP to connect 100Mbps
devices. To connect 10Mbps devices use
CAT 3, 4, or 5 UTP.
Left (Orange/Green)
Orange = 10Mbps
Green = 100Mbps
Solid = Link
Blink = Activity
Right (Yellow)
Solid = Disabled
Blink = Wrong speed
Colls 10Mbps
Colls 100Mbps
RPS
Power
Intel Express 220T
Stackable Hub
Bridged
Managed
Enable/Disable
Bridging
Status
Class
I
Left (Orange/Green)
Orange = 10Mbps
Green = 100Mbps
Solid = Link
Blink = Activity
Right (Yellow)
Solid = Disabled
Blink = Wrong speed
12345678 9101112
Rack: Use the four
small screws to attach
the brackets to the hub.
Shelf: Peel off the protective
backing and attach the rubber
feet to the hub.
3
1
2
100
100
100
Hub Switch
Hub Print Server
Hub PC/Server
crossover
straight-through
From To
English
1