Filter
Top Products
35
This installation verification procedure is specific only to the version of
the driver and installation file included in this package.
This subsection describes how to verify installation of the software on
a system where Windows 95* is installed.
This installation verification procedure is specific only to the version of
the driver and installation file included in this package.
If the system does not operate reliably or fails to boot when the driver
is installed, De-install the driver. Refer to the RELEASE NOTES
section for more information.
In order to verify the installation of the driver:
1. Open the Control Panel folder.
2. Invoke the System applet.
3. Click on the Device Manager tab.
4. Select the View Devices by Type option. A list of the devices
connected to the system will be displayed.
5. Click on the Hard Disk Controllers record. One of two cases
will be listed.
For CASE 1, there could be up to three instances listed:
Intel 82371XX PCI Bus Master IDE Controllers
Primary Bus Master IDE Controller
Secondary Bus Master IDE Controller
Go to step 6 for CASE 1.
For CASE 2, there could be up to two instances listed:
Intel PIIX PCI Bus Master IDE Controller
Intel PIIX PCI Bus Master IDE Controller
Go to step 7 for CASE 3.
NOTE FOR ALL CASES:
a. The content of the text strings is dependent on the
driver's INF file (named IDEATAPI.INF in the driver's
install directory).