Intel 500 Switch User Manual


 
696946.bok : legal 12 Tue Apr 21 14:27:26 1998
12
APPENDIX A Limited Hardware Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer could void the
user’s authority to operate this equipment.
Manufacturer Declaration
Intel declares that the Express 500 Series Switches comply with the EU Directive 89/336/EEC, using the EMC standards EN55022
and EN50082-1. These products also meet EU Directives 74/23/EEC and 93/68/ and are certified by DEMKO to be compliant with
EN 60950/A1/A2/A3 and by UL to be compliant with UL 1950 and CSA -C22.2 No. 950. These products have been tested and
verified to meet CISPR 22 Class A requirements and are registered with VCCI Class 1 products.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be re-
quired to take adequate measures.
WARNING
The system is designed to operate in a typical office environment. Choose a site that is:
Clean and free of airborne particles (other than normal room dust).
Well ventilated and away from sources of heat including direct sunlight.
Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by electrical devices.
In regions that are susceptible to electrical storms, we recommend you plug your system into a surge suppressor and discon-
nect telecommunication lines to your modem during an electrical storm.
Provided with a properly grounded wall outlet.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type required.
Ensure that the system is disconnected from its power source and from all telecommunications links, networks, or modems lines
whenever the chassis cover is to be removed. Do not operate the system with the cover removed.
AVERTISSEMENT
Le système a été conçu pour fonctionner dans un cadre de travail normal. L’emplacement choisi doit Ítre:
Propre et dépourvu de poussière en suspension (sauf la poussière normale).
Bien aèrè et loin des sources de chaleur, y compris du soleil direct.
A l’abri des chocs et des sources de ibrations.
Isolé de forts champs magnétiques géenérés par des appareils électriques.
Dans les régions sujettes aux orages magnétiques il est recomandé de brancher votre système à un supresseur de surtension, et
de débrancher toutes les lignes de télécommunications de votre modem durant un orage.