![](http://pdfasset.owneriq.net/0/f2/0f298548-097d-4bd6-8aea-61cc916698f9/0f298548-097d-4bd6-8aea-61cc916698f9-bg36.png)
44
C H A P T E R 3 Standard Configuration
44
Internet Protocol
Changing IP details To change the main IP address and network mask:
1 Select Device Setup or Stack Setup.
2 Click IP.
3 Change the details.
4 Click OK.
This is used to contact the switch via IP (TFTP, SNMP, TEL-
NET etc.) protocols.
500.book Page 44 Thursday, September 2, 1999 1:17 PM