![](http://pdfasset.owneriq.net/0/f2/0f298548-097d-4bd6-8aea-61cc916698f9/0f298548-097d-4bd6-8aea-61cc916698f9-bg50.png)
70
C H A P T E R 4 Advanced Configuration
70
Enabling IGMP pruning
IGMP pruning implements a system where only the necessary
amount of IP multicast packets are bridged. To enable IGMP pruning:
1 Select VLAN Setup.
2 Click Advanced>IP Routing>IGMP.
3 Check Enabled.
4 In Pruning timeout, type the new value.
5 Click OK.
500.book Page 70 Thursday, September 2, 1999 1:17 PM