Filter
Top Products
Installation Guide for the Intel Server Control 19
Customizing NetWare Servers After Setup
While installing PIC, the configuration and Setup program installs Adaptec and LSI (Symbios)
SCSI, and Intel
®
LAN Adapter instrumentation on the NetWare server but does not enable the
instrumentation support.
To enable support for any or all instrumentation, you must edit the AUTOEXEC.NCF file in the
SYS:SYSTEM directory as follows:
Add the line:
rpsstart.ncf
before the line:
isc_on.ncf
To enable the Adaptec SCSI instrumentation, remove the word REM from these lines:
REM load simcinw.nlm
REM load simcinw.nlm
To enable the Intel LAN Adapter instrumentation, remove the word REM from this line:
REM load e100bdmi.nlm /auto
To enable the LSI (Symbios) SCSI instrumentation, remove the word REM from this line:
REM load simcinw.nlm