Intel 8I945PE-FS Computer Hardware User Manual


 
8I945PE-FS Motherboard - 4 -
English
CPU Supports Intel
®
Pentium
®
D / Pentium
®
4 LGA775 CPU
Supports 1066/800/533MHz FSB
L2 cache varies with CPU
Chipset Northbridge: Intel
®
945P Express chipset
Southbridge: Intel
®
ICH7
Supported on the Win 2000/XP/MCE operating systems
Memory 4 DDRII DIMM memory slots (supports up to 4GB memory)
(Note 1)
Supports dual channel DDR II 667
(Note 2)
/533/400 DIMM
Supports 1.8V DDR II DIMM
Slots 1 PCI Express x 16 slot
1 PCI Express x 1 slot
2 PCI slots
IDE Connections 1 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 2 IDE
devices
FDD Connections 1 FDD connection, allows connection of 2 FDD devices
Onboard SATA 3Gb/s 4 SATA 3Gb/s connections
Supported on the Win 2000/XP/MCE operating systems
Peripherals 1 parallel port supporting Normal/EPP/ECP mode
1 COMA port
8 USB 2.0/1.1 ports
1 front audio connector
Onboard LAN Onboard 82562 chip (10/100 Mbit)
1 RJ 45 port
Onboard Audio ALC880 CODEC
Supports Jack Sensing function
Supports 2 / 4 / 6 / 8 channel audio
Supports Line In ; Line Out (Front Speaker Out) ; MIC ;
Surround Speaker Out (Rear Speaker Out) ; Center/Subwoofer Speaker Out ;
Side Speaker Out connection
Supports SPDIF Out connection
AUX_In
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system
startup.
(Note 2) To use a DDRII 667 memory module on the motherboard, you must install an 800/1066MHz
FSBprocessor .
1-1 Feature Summary
Chapter 1 Hardware Installation