Intel 945GCT Computer Hardware User Manual


 
- 29 -
Intel 945 Series User's Manual
[Mouse Left]: Double click the mouse left button to power on the system.
[Mouse Right]: Double click the mouse right button to power on the system.
[Any KEY]: Use any keyboard keys to power on the system.
[Button Only]: Use only the power button to power on the system.
[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to
power on the system.
Onboard FDC Controller
This option enables or disables the onboard FDC controller.
Onboard Serial Port 1
This item determines which I/O addresses the onboard Serial Port controller will access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an
I/O address for the onboard Serial Port.
[Disabled]: Disables the onboard Serial Port.
Onboard Parallel Port
This item species the I/O address used by the parallel port.
[Disabled]: This option prevents the parallel port from accessing any system resources.
When the value of this option is set to [Disabled], the printer port becomes
unavailable.
[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port
address. The majority of parallel ports on computer systems use IRQ7
and I/O Port 378H as the standard setting.
[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port
address.
[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port
address.
Parallel Port Mode
This item species the parallel port mode.
[Normal]: Allow the standard parallel port mode to be used.
[SPP]: (Standard Parallel Port) Allow bi-directional parallel port operation at normal
speed.
[EPP]: (Enhanced Parallel Port) Allow bi-directional parallel port operation at maximum
speed.
[ECP]: (Extended Capabilities Port) Allow bi-directional parallel port operation at a
speed faster than the normal mode’s data transfer rate.
[ECP+EPP]: Allow parallel port operation at ECP and EPP mode.
EPP Mode Select
This item selects the EPP mode.
ECP Mode Use DMA
This item selects the DMA channel of the parallel port.
PWRON after PWR-Fail
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
Back to Integrated Peripherals Setup Menu
KB Power ON Password
If you select [Password],this function will be activation.
Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.
Hot Key Power ON
If you select [Hot Key], this function will be activation.
Available options: Ctr-F1~F12