Filter
Top Products
User’s Manual
©2002 AEWIN Technologies Co., Ltd.. All rights reserved. Ver 1.0. Jan. 2005
38
Supervisor/User Password
The password options let you prevent unauthorized system boot-up or unauthorized use of
CMOS setup. The Supervisor Password allows both system and CMOS Setup program
access; the User Password allows access to the system and the CMOS Setup Utility main
menu.
The password functions are disabled by default. You can use these options to enable a
password function or, if a password function is already enabled, change the password.
To change a password, first choose a password option from the main menu and enter the
current password. Then type your new password at the prompt. The password is case
sensitive and you can use up to 8 alphanumeric characters. Press <Enter> after entering
the password. At the Next Prompt, confirm the new password by typing it and pressing
<Enter> again.
Time, Date, Hard Disk Type...
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Pheripherals
Power Management Setup
PnP/PCI Configuration
PC Health Status
Frequency/Voltage Control
Load Fail-Safe Default
Load Optimized Defaults
Set Password
Save and Exit Setup
Exit Without Saving
Esc : Quit
F10 : Save & Exit Setup
: Select Item
Phoenix - AwardBIOS CMOS Setup Utilities
Time, Date, Hard Disk Type...Time, Date, Hard Disk Type...Time, Date, Hard Disk Type...Time, Date, Hard Disk Type...
Enter Password:
After you use this option to enable a password function, use the “Security Option” in “BIOS
Feature Setup” to specify whether a password is required every time the system boots or
only when an attempt is made to enter the CMOS Setup program.