Filter
Top Products
2 Setting Up the Chassis
Intel® Entry Server Chassis SC5275-E User Guide 26
Install the Front Bezel
1. Angle the bezel toward the chassis as shown by number 1 in the figure below.
2. Insert the latches on the right side of the bezel (facing down in the figure below) into the
corresponding slots in the chassis. See number 2 in the figure.
3. Rotate the left side of the bezel (facing up in the figure below) over the side of the chassis to
engage the two tabs. See number 3 in the figure.
The installation of the chassis access cover will prevent the bezel from being removed.
TP00056
22
22
33
33
11
Figure 15. Installing the Front Bezel