Filter
Top Products
40
4-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the
chipset registers. These registers control most of the system options in the computer.
Item Help
DRAM Clock/Drive Control [Press Enter
]
AGP & P2P Bridge Control [Press Enter]
Memory Hole
[Disabled]
System BIOS Cacheable [Enabled]
Video RAM Cacheable
[Disabled]
Menu Level >>
:Move Enter:Select +/
-
/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
The menu is to include settings for the chipset dependents features.These features are
related to system performance. Make sure you fully understand the items contained in this
menu before you change anything. You may change the parameter settings to improve
system performance. However, it may make your system unstable if the setting is not
correct for your system configuration.
Phoenix- AwardBIOS CMOS Setup Utility
Advanced Chipset Features
4-6-1 DRAM Clock/Drive Control
Item Help
Current FSB Frequency
100 MHz
Current DRAM Frequency 266 MHz
DRAM Clock [By SPD]
DRAM Timing [Auto By SPD]
Menu Level >>
:Move Enter:Select +/
-
/PU/PD:Value F10:Save ESC:Exit F1:General Help
Phoenix- AwardBIOS CMOS Setup Utility
DRAM Clock/Drive Control
X SDRAM CAS Latency [DDR / DDR 2.5 / 4
X Bank Interleave Disabled
x Precharge to Active <Trp> 4T
x Active to Precharge <Tras> 07T
x Active to CMD <Trcd> 4T
x REF toACT / REF (Trfc) 21T
X ACT(0) to ACT(1) (TRRD) 3T
Read to Precharge (Trtp) [2T]
Write to Read CMD (Twtr) [1T/2T]
Write Recovery Time (Twr) [4T]
DRAM Command Rate [2T Command]
RDSAIT mode [Auto]
x RDSAIT selection 03
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults