Filter
Top Products
Using the Setup Program
47
Boot Configuration Submenu
Maintenance Main Advanced Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
The submenu shown in Table 12 is used to set the Plug & Play options, reset configuration data,
and the power-on state of the Numlock key.
Table 12. Boot Configuration Submenu
Feature Options Description
Plug & Play O/S • No (default)
• Yes
Specifies if manual configuration is desired.
No lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes lets the operating system configure Plug and Play devices
not required to boot the system. This option is available for use
during lab testing.
Numlock • Off
• On (default)
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.